Current Advance in Materials and Process, Vol.20, No.3
13:00∼13:40 | ||
J1 | (Honorable Member Memorial Lecture)
Strong metals benefit society Niels Hansen |
··· 596 |
13:50∼14:50 | ||
J2 | Dynamic deformation behavior of ultra-fine grained IF steel Y.Okitsu |
··· 596 |
J3 |
Dynamic deformation behavior of ultra-fine grained ferrite-cementite steel Y.Okitsu |
··· 597 |
J4 |
Dynamic deformation behavior of ultra-fine grained aluminum N.Takata |
··· 597 |
15:00∼16:00 | ||
J5 | Strengthening of low-carbon steel by HPT-straining and annealing Y.Todaka | ··· 598 |
J6 |
Influence of carbon content in strength and microstructure of carbon-steels processed by HPT
T.Tsurunaga |
··· 599 |
J7 | Effect of strain path on grain refinement by severe plastic deformation
Y.Todaka |
··· 600 |
9:00∼10:20 | ||
J8 | Grain-refinement of C-Mn steel by ultra-fast cooling after hot-rolling in a stable austenite region(Part2)
N.Imai |
··· 601 |
J9 | Tensile deformation behavior of ultra-fine-grained steel due to super short interval multi-pass rolling
(Development of super short interval multi-pass rolling technology for ultra-fine-grained steel-12) K.M.Kawano |
··· 602 |
J10 | Formability of ultra-fine-grained steel due to super short interval multi-pass rolling
(Development of super short interval multi-pass rolling technology for ultra-fine-grained steel-13) M.Wakita |
··· 603 |
J11 | Numerical simulation of microstructure evolution on SSMR process for ultra-fine-grained steel
(Development of super short interval multi-pass rolling technology for ultra-fine-grained steel-14) S.Fukushima |
··· 604 |
10:30∼11:50 | ||
J12 | Low temperature recrystallization in severely deformed pure iron D.Terada |
··· 605 |
J13 | Peculiar phenomena in SPD processed SUS310S austenitic stainless steel powder Y.Iwahashi |
··· 606 |
J14 | Possibility for managing both high strength and ductility in pure copper having bimodal nanostructure N.Takada |
··· 607 |
J15 | Change in microstructure and mechanical properties during annealing of commercial purity Ti severely deformed by ARB process D.Terada |
··· 607 |
13:00∼14:00 | ||
J16 | Tensile property of ultra fine-grained austenitic steel thin wire produced by reversion of deformation-induced martensite T.Inoue |
··· 608 |
J17 | Aging behavior of ultrafine grained Al-0.5%Si alloy fabricated by ARB Y.Satou | ··· 609 |
J18 | Estimation of equal-channel angular pressed aluminum by using neutron diffraction T.Suzuki |
··· 609 |
14:10∼15:10 | ||
J19 | Hybrid microstructure and mechanical property in HRS material of SPD processed pure titanium powder H.Fujiwara |
··· 610 |
J20 | Microstructural evolution deformed heavily by high strain rate at high temperature range in ultra low carbon steel
-2nd report:grain growth after dynamic recrystallization- Joo-Hee Kang |
··· 611 |
J21 | Influence of the micro-addition of Fe on mechanical properties of nanocrystalline tungsten materials E.Oda |
··· 612 |
9:00∼10:20 | ||
J22 | Alloy design of Ti-Nb-Zr alloy by using Bo-Md diagram H.Fuwa |
··· 612 |
J23 | Elastic modulus and tensile properties of α'-type Ti-V-Sn alloy after cross rolling H.Matsumoto |
··· 613 |
J24 | Characteristics of mouthpieces for brass instruments made of titanium alloys M.Niinomi |
··· 614 |
J25 | Effect of Al addition on fatigue properties of Ti-13Cr-1Fe-Al alloys M.Ogawa | ··· 615 |
10:30∼11:50 | ||
J26 | Improvement of acid resistance and electroconductive by heat-treatment to Au coating titanium J.Suzuki | ··· 616 |
J27 | Mechanical properties in pure Ti processed by HPT and subsequent heating J.Sasaki |
··· 617 |
J28 | Effect of nitrogen addition on the mechcanical properties in Ti-13mass%Cr beta type alloy T.Andou |
··· 617 |
J29 | Effect of microstructure on age hardening of metastable β Ti alloy T.Sakamoto |
··· 618 |
Current Advance in Materials and Process, Vol.20, No.1
March 28. Room5(JIM-ZZ)
Fundamentals and application of microwave processing-1
9:30∼10:30
J30
Capabilities of millimeter-wave processing in materials synthesis
Y.Makino
··· 266
J31
Microstructure of PZT thin films crystallized by microwave irradiation
Zhanjie WANG
··· 266
J32
Integration of microwave processing and mechanical alloying for nanocrystalline control consolidation in ceramics
H.Kimura
··· 267
Fundamentals and application of microwave processing-2
10:40∼12:00
J33
Reduction and gas conversion behavior of waste plastics and iron ore mixtures by microwave heating
T.Taniguchi
··· 268
J34
Rate of carbo-thermal reduction reaction of NiO by microwave irradiation
N.Yoshikawa
··· 269
J35
Influence of iron powder addition to Na2O-CaO-SiO2 glass beads on the microwave heating
N.Yoshikawa
··· 270
J36
Application of microwave irradiation to hydrothermal treatment for upgrading blast furnace slag
Soon-Jae Tae
··· 270
Fundamentals and application of microwave processing-3
13:30∼14:30
J37
(Invited Lecture)
Novel fuel reforming by microwave irradiation
H.Fukushima
··· 272
J38
Behavior of deoxidizations on magnetite in air by microwave heating
S.Takayama
··· 272
J39
Material science for microwave exited high temperature thermally non-equilibrium state
M.Sato
··· 273
Fundamentals and application of microwave processing-4
14:40∼16:00
J40
Microwave induced sintering of Ni52.5Zr15Nb10Ti15Pt7.5 metallic glass
D.V.Louzguine-Luzgin
··· 274
J41
Microwave absorption of Co powder at elevated temperature
S.Sano
··· 274
J42
Effect of dielectric layer between metal particles on interaction with electromagnetic wave
S.Utsuno
··· 275
J43
Microwave heating of thin metal film
S.Kakiuchi
··· 275